Antenna esterna POWERBOOSTER per GPS( Navman e Garmin)
per incrementare il segnale del GPS all'interno dell'aauto
Physical
Characteristics:
Constructions: Polycarbonate radome enclosure
Dimensions: 58mm(L) x 48mm(W) x 15mm(H).
Weight: 65grams.
Standard Mounting: 2 magnet mount, screw mount with 2 M3 tapped
holes on
the base.
Optional mounting plate: Metal flanges with holes for permanent
mount.
Cable &
Connector:
RF: 4 meter RG174/U (standard) cable (That length can be customized.)
Pulling strength: 6 Kg @ 5sec.
Connector available: BNC, TNC, FME, MMCX, MCX, SMA, SMB or SMC.
Straight or right angle.
Optional: Universal Connector Adapter (FME to TNC/BNC/SMA/SMB/MCX)
Antenna
Element:
Polarization: R.H.C.P. (Right Handed Circular Polarization).
Absolute Gain @ Zenith: +5 dBi typical.
Gain @ 10o Elevation: -1 dBi typical.
Axial Ratio: 3 dB max.
Output VSWR: 1.5:1 max.
Output Impedance: 50
Low
Noise Amplifier:
Center Frequency: 1575.42 MHz +/- 1.023 MHz.
Power Gain: 30 dB typically
Bandwidth: 2 MHz min.
Noise Figure: 1.5 max.
Outer Band Attenuation: 20 dB min. @ Fo +/-50 MHz.
Supply Voltages: 7-14V DC.
Current Consumption: 28mA +- 3mA
Output Impedance: 50
Overall
Performance: (antenna element, LNA & coax cable)
Center Frequency: 1575.42 MHz
Gain: 27 dB min.
Noise Figure: 2.0max.
Axial Ratio: 3 dB max. .
VSWR: 2.0 max
Output Impedance: 50
RE-radiating range: 30cm ~ 50cm
Environmental
Conditions:
Operating Temperature: -40oC~ +85oC.
Storage Temperature: -50oC~ +90oC.
Relative Humidity: 95% non-condensing.
Water Resistance: 100% waterproof.
|